How To Replace a Bubble Wand
One of our most frequently asked questions is, “How do I replace the wand in my bubble wall?” Rather than simply tell you, we’ve created a video with step-by-step instructions. Be sure to the pause the video at any time, if you need to. The instructions are also listed below this video!
- Remove the bubblewall from the wall, and turn it upside down in a space where you can easily drain it (bath tub, sink, etc.)
- Place the bubblewall upside down on a soft surface, so that you have access to the bubble wand.
- Remove the incoming airline and slowly pull the bubble wand out of the unit.
- Use a soft-bristled toothbrush (or something similar) to clean the holes of the bubble wand.
- Moisten the end of the bubble wand with soapy water.
- Insert the bubble wand back into the unit an inch at a time. There are notches located in each panel, and you may need to twist the bubble wand until it finds it’s way through the notches.
- Re-attach the airline to the bubble wand, and then re-attach it to the one-way valve.
- You’re finished! Refill your bubblewall with distilled water.
If you have any additional questions, click here to contact us!
